You are here: Home > Equipment
Sort By:
Page of 1
9" SANDING DISC PAD PANAVISE MAGNET BASE PANAVISE JR.MINI
9" SANDING DISC PAD
Our Price: $5.00
PANAVISE MAGNET BASE
Our Price: $15.00
PANAVISE JR.MINI
Our Price: $22.75
Use spray adhesive to affix this 1/8" thick rubber pad to disc and attach  sandpaper to provide a slight cushion for flat grinding or handle finishing. P335 Magnet Base for Panavise This popular, small precision Pana Vise has all the traditional "tilt, turn and rotate" features of its big brothers. The grooved jaws open to 2-7/8" and are made of fiber reinforced thermal composite alloy. Jaws are controlled with a fine/coarse adjusting knob which permits very delicate work. Head movement is through three planes (360° rotation/swivel, 210° pivot) and is controlled with a single knob. 6-3/4" tall, 1-1/4 lbs. & packaged  in a clamshell which can be hung on a pegboard or set on a shelf.
BLADE FIXTURE FOR KILN HEATSINK FOR BALDOR PANAVISE STANDARD
BLADE FIXTURE FOR KILN
Our Price: $35.00
HEATSINK FOR BALDOR
Our Price: $38.00
PANAVISE STANDARD
Our Price: $41.50
"New Item" Blade Fixture for Kiln Baldor Variable Speed Motor 1 hp motor Perfect for both industrial and home hobbyist applications. Single knob controls the "tilt, turn and rotate" function of the patented split ball, which allows the head to move easily and conveniently through three planes (360° rotation/swivel, 90° pivot). Jaws are 2-1/2" wide & open to 2-1/4", base features a 4-5/16" bolt circle. 6-3/4" tall, 2 lbs. 11oz, & features the 300 Std. Base,  303 Std. Head& the 343 Nylon Jaws.
BADER WHEEL 1/2X2 PLAIN BADER WHEEL 5/8X2 PLAIN BADER WHEEL 3/4X2 PLAIN
BADER WHEEL 1/2X2 PLAIN
Our Price: $59.50
BADER WHEEL 5/8X2 PLAIN
Our Price: $59.50
BADER WHEEL 3/4X2 PLAIN
Our Price: $59.50
Prices listed for wheels 1/2” through 5” dia. in any width include shaft and bearings. Wheels 1/2” and 5/8” diameter are not available in a serrated face. Wheels 1/2” through 3” diameter should not be run at speed in excess of 3000 SFPM. Prices listed for wheels 1/2” through 5” dia. in any width include shaft and bearings. Wheels 1/2” and 5/8” diameter are not available in a serrated face. Wheels 1/2” through 3” diameter should not be run at speed in excess of 3000 SFPM. Prices listed for wheels 1/2” through 5” dia. in any width include shaft and bearings. Wheels 1/2” and 5/8” diameter are not available in a serrated face. Wheels 1/2” through 3” diameter should not be run at speed in excess of 3000 SFPM.
BADER WHEEL 1 X 2 PLAIN BADER WHEEL 1 1/4 X 2 PLAIN BADER WHEEL 1-1/2X2 PLAIN
BADER WHEEL 1 X 2 PLAIN
Our Price: $59.50
BADER WHEEL 1-1/2X2 PLAIN
Our Price: $66.25
Prices listed for wheels 1/2” through 5” dia. in any width include shaft and bearings. Wheels 1/2” and 5/8” diameter are not available in a serrated face. Wheels 1/2” through 3” diameter should not be run at speed in excess of 3000 SFPM. Prices listed for wheels 1/2” through 5” dia. in any width include shaft and bearings. Wheels 1/2” and 5/8” diameter are not available in a serrated face. Wheels 1/2” through 3” diameter should not be run at speed in excess of 3000 SFPM. Prices listed for wheels 1/2” through 5” dia. in any width include shaft and bearings. Wheels 1/2” and 5/8” diameter are not available in a serrated face. Wheels 1/2” through 3” diameter should not be run at speed in excess of 3000 SFPM.
HEATSINK KIT BADER WHEEL STEADY REST BADER WHEEL 2 X 2 PLAIN
HEATSINK KIT
Our Price: $70.00
BADER WHEEL STEADY REST
Our Price: $70.00
BADER WHEEL 2 X 2 PLAIN
Our Price: $74.00
1hp Variable Speed Motor.  These will fit Burr King, Square Wheel, Bader, Blademaster and others.  This will also make an excellent variable speed disc sander.  All motors and accessories sold separately. Complete Motor Packages include Controller and Heat Sink. BADER WHEEL STEADY REST Prices listed for wheels 1/2” through 5” dia. in any width include shaft and bearings. Wheels 1/2” and 5/8” diameter are not available in a serrated face. Wheels 1/2” through 3” diameter should not be run at speed in excess of 3000 SFPM.
MULTI PURPOSE WORK SANDING DISC 9" ALUMINUM BADER WHEEL 3 X 2 PLAIN
MULTI PURPOSE WORK
Our Price: $75.25
SANDING DISC 9" ALUMINUM
Our Price: $81.00
BADER WHEEL 3 X 2 PLAIN
Our Price: $86.75
We start with a 376 Self-Centering Extra-Wide Opening Head which is recommended for holding heavier objects but which can be used to hold delicate ones, too. Includes the 300 Standard Base w/ single knob for "tilt, turn and rotate control" and the  312 Parts Tray Base Mount. 7-7/8" tall 5lbs. For electronics buffs, a 371 Solder Station can be added for increased versatility. Machined aluminum balanced for smooth sanding or flat grinding. 5/8" arbor hole Prices listed for wheels 1/2” through 5” dia. in any width include shaft and bearings. Wheels 1/2” and 5/8” diameter are not available in a serrated face. Wheels 1/2” through 3” diameter should not be run at speed in excess of 3000 SFPM.
BADER WHEEL 4 X 2 PLAIN OR SERRATED BADER WHEEL 5 X 2 PLAIN OR SERRATED PRECISION PANA PRESS
PRECISION PANA PRESS
Our Price: $132.25
Prices listed for wheels 1/2” through 5” dia. in any width include shaft and bearings. Wheels 1/2” and 5/8” diameter are not available in a serrated face. Wheels 1/2” through 3” diameter should not be run at speed in excess of 3000 SFPM. Prices listed for wheels 1/2” through 5” dia. in any width include shaft and bearings. Wheels 1/2” and 5/8” diameter are not available in a serrated face. Wheels 1/2” through 3” diameter should not be run at speed in excess of 3000 SFPM. Weighs less than 6 lbs and stands 7" high (not including 8" arm or ram height). This hand arbor press exerts pressure up to 1/4 ton and features a reversible ram. Ram is 3/4" x 3/4" and 5-7/8 long. Four adjustable nylon gibs provide exceptional ram control. Ideal for pressing bearings, sleeves, collars, forming and assembling small parts, punching, riveting, broaching, staking, etc. 5 lbs. 7 ozs.
IDLER ASSEMBLY Filing Jig Carbide 2IN PLATEN WITH 2X2 WHEEL
IDLER ASSEMBLY
Our Price: $149.95
Filing Jig Carbide
Our Price: $150.00
2IN PLATEN WITH 2X2 WHEEL
Our Price: $192.00
Idler assembly with tracking adjustment and mounting bracket This tool is used to file square shoulders on a hidden tang knife. Has two carbide plates. 2IN PLATEN WITH 2X2 WHEEL
CONTROLLER BADER WHEEL 6 X 2 PLAIN BADER WHEEL 6 X 2 SERRATED
CONTROLLER
Our Price: $195.00
BADER WHEEL 6 X 2 PLAIN
Our Price: $206.00
BADER WHEEL 6 X 2 SERRATED
Our Price: $222.00
Baldor Reversing Controller with brake Prices for wheels 6” through 10” diameter do not include shaft and bearing. Add $90.00 if shaft and bearings are to be included. For use on Wilton machines specify 3/4” shaft. Specify bore on wheels for other machine types. Prices for wheels 6” through 10” diameter do not include shaft and bearing. Add $90.00 if shaft and bearings are to be included. For use on Wilton machines specify 3/4” shaft. Specify bore on wheels for other machine types.
CONTROL, NON-REVERS REV CONTROLLER W/BRAKE REV CONTROLLER W/BR
CONTROL, NON-REVERS
Our Price: $226.00
REV CONTROLLER W/BRAKE
Our Price: $248.00
REV CONTROLLER W/BR
Our Price: $268.75
1hp Variable Speed Motor.  These will fit Burr King, Square Wheel, Bader, Blademaster and others.  This will also make an excellent variable speed disc sander.  All motors and accessories sold separately. Complete Motor Packages include Controller and Heat Sink. 1hp Variable Speed Motor.  These will fit Burr King, Square Wheel, Bader, Blademaster and others.  This will also make an excellent variable speed disc sander.  All motors and accessories sold separately. Complete Motor Packages include Controller and Heat Sink. Baldor Heatsink for the variable speed motors
BADER WHEEL 8 X 2 PLAIN COMBINATION ARM 9" DISC SANDER TABLE
BADER WHEEL 8 X 2 PLAIN
Our Price: $270.00
COMBINATION ARM
Our Price: $275.00
9" DISC SANDER TABLE
Our Price: $300.00
Prices for wheels 6” through 10” diameter do not include shaft and bearing. Add $90.00 if shaft and bearings are to be included. For use on Wilton machines specify 3/4” shaft. Specify bore on wheels for other machine types. COMBINATION ARM FOR BADER 9" Sanding Disc, Table (Motor Not Included)
BADER WHEEL 8 X 2 SERRATED KALAMAZOO 1" SANDER W/ MOTOR (#1SM) BADER WHEEL 10 X 2 PLAIN FACE WHEEL
BADER WHEEL 8 X 2 SERRATED
Our Price: $308.00
Prices for wheels 6” through 10” diameter do not include shaft and bearing. Add $90.00 if shaft and bearings are to be included. For use on Wilton machines specify 3/4” shaft. Specify bore on wheels for other machine types. 1" x 42" Belt. Direct drive 1/2 HP, 1 Phase, Contact wheel, tilt table, weight 29 lbs Prices for wheels 6” through 10” diameter do not include shaft and bearing. Add $90.00 if shaft and bearings are to be included. For use on Wilton machines specify 3/4” shaft. Specify bore on wheels for other machine types.
1/3HP BALDOR BUFF 111 1/4HP BALDOR BUFF 114 BADER WHEEL 10" X 2" SERRATED
1/3HP BALDOR BUFF 111
Our Price: $375.00
1/4HP BALDOR BUFF 114
Our Price: $375.00
Ruggedly built to withstand the most demanding workloads. Units feature large-diameter shafts and extra-large, lubricated-for-life ball bearings.Special felt seals protect ball bearings against dust and dirt. Long, extended shafts and slim, trim motor frame provide extra-wide clearance for buffing and polishing odd-shaped items. Spacers permit use of a wide variety of different width wheels. Baldor guarantees their buffers for two years from the purchase date. Ruggedly built to withstand the most demanding workloads. Units feature large-diameter shafts and extra-large, lubricated-for-life ball bearings.Special felt seals protect ball bearings against dust and dirt. Long, extended shafts and slim, trim motor frame provide extra-wide clearance for buffing and polishing odd-shaped items. Spacers permit use of a wide variety of different width wheels. Baldor guarantees their buffers for two years from the purchase date. Prices for wheels 6” through 10” diameter do not include shaft and bearing. Add $90.00 if shaft and bearings are to be included. For use on Wilton machines specify 3/4” shaft. Specify bore on wheels for other machine types.
KALAMAZOO 2 X 48" WITH MOTOR 1 1/2 hp BALDOR MOTOR 2500 rpm # 9" SANDING DISC WITH TABLE & 1/3 hp MOTOR SINGLE SPEED REVERSING
2" x 48" Belt, Direct drive 1/2HP, 1 Phase motor and switch, contact wheel, tilt table and removable platen, full hinged guard for quick belt change. Baldor Non Reversing Controller 9" Sanding Disc, Table w/1/3 HP reversing motor
1 HP MTR W/REV CONTROLLER LEESON 1.5 HP MOTOR 220V 3/4 (1725)B.BUFF 332B
1 HP MTR W/REV CONTROLLER
Our Price: $662.00
LEESON 1.5 HP MOTOR 220V
Our Price: $718.25
3/4 (1725)B.BUFF 332B
Our Price: $740.00
1 hp motor with reversing controller. 1 1/2hp Variable Speed Motor.  These will fit Burr King, Square Wheel, Bader, Blademaster and others.  This will also make an excellent variable speed disc sander.  All motors and accessories sold separately. Ruggedly built to withstand the most demanding workloads. Units feature large-diameter shafts and extra-large, lubricated-for-life ball bearings.Special felt seals protect ball bearings against dust and dirt. Long, extended shafts and slim, trim motor frame provide extra-wide clearance for buffing and polishing odd-shaped items. Spacers permit use of a wide variety of different width wheels. Baldor guarantees their buffers for two years from the purchase date.
3/4 3450 B.BUFF 333B 1 1/2 HP W/CTRL BLT KALAMAZOO 2 X 72 GRINDER W/MOTOR
3/4 3450 B.BUFF 333B
Our Price: $740.00
1 1/2 HP W/CTRL BLT
Our Price: $750.00
Ruggedly built to withstand the most demanding workloads. Units feature large-diameter shafts and extra-large, lubricated-for-life ball bearings.Special felt seals protect ball bearings against dust and dirt. Long, extended shafts and slim, trim motor frame provide extra-wide clearance for buffing and polishing odd-shaped items. Spacers permit use of a wide variety of different width wheels. Baldor guarantees their buffers for two years from the purchase date. 1½hp  DC motor. Having the controller built into the base is a nice feature. The Baldor quality is there. 2" x 72" Belt, Direct drive 1/2HP, 1 Phase motor and switch, contact wheel, tilt table and removable platen, full hinged guard for quick belt change.
LEESON 1.5HP MOTOR PACKAGE 1.5 33450 B.BUF 410B 1HP B.BUFF 407B
LEESON 1.5HP MOTOR PACKAGE
Our Price: $960.15
1.5 33450 B.BUF 410B
Our Price: $965.00
1HP B.BUFF 407B
Our Price: $980.00
1 1/2hp Variable Speed Motor.  These will fit Burr King, Square Wheel, Bader, Blademaster and others.  This will also make an excellent variable speed disc sander.  All motors and accessories sold separately. Complete Motor Packages includes a Non Reversing Controller and Heat Sink. 220v Ruggedly built to withstand the most demanding workloads. Units feature large-diameter shafts and extra-large, lubricated-for-life ball bearings.Special felt seals protect ball bearings against dust and dirt. Long, extended shafts and slim, trim motor frame provide extra-wide clearance for buffing and polishing odd-shaped items. Spacers permit use of a wide variety of different width wheels. Baldor guarantees their buffers for two years from the purchase date. Ruggedly built to withstand the most demanding workloads. Units feature large-diameter shafts and extra-large, lubricated-for-life ball bearings.Special felt seals protect ball bearings against dust and dirt. Long, extended shafts and slim, trim motor frame provide extra-wide clearance for buffing and polishing odd-shaped items. Spacers permit use of a wide variety of different width wheels. Baldor guarantees their buffers for two years from the purchase date.
EVENHEAT KNIFE KILN GORTON PANTOPGRAPH P-1-3 BADER BIII GRINDER
EVENHEAT KNIFE KILN
Our Price: $1,335.00
GORTON PANTOPGRAPH P-1-3
Our Price: $2,000.00
BADER BIII GRINDER
Our Price: $2,100.00
"New Item" Evenheat Knife Kiln GORTON PANTOGRAPH P-1-3 (USED) INCLUDES COLLETS AND STYLISTS. PICK UP ONLY PLEASE CALL FOR MORE INFO 928-242-3048.
B3 BENCH MODEL complete with 1-1/2 HP 110- 220 volt, single phase, TEFC motor, HD arm, serrated rubber 8” x 2” wheel with bearing hub and flanges, Adapter arm with Fork tip and 1/2”, 3/4”, or 1” dia x 2” wide wheel, 6” and 3” diameter drive pulleys to yields belt speeds of 5800 or 2800 SFPM. (Pulleys to yield other speeds from 1000 to 8000 SFPM may be substituted for standard sizes or purchased separately.
2 HP SINGLE PHASE 110-220 BOLT TEFC MOTOR 1 1/2 HP VARIABLE SPEED BADER GRINDER 2 HP VARIABLE SPEED
1 1/2 HP VARIABLE SPEED
Our Price: $3,095.00
B3 BENCH MODEL complete with 2 HP 110- 220 volt, single phase, TEFC motor, HD arm, serrated rubber 8” x 2” wheel with bearing hub and flanges, Adapter arm with Fork tip and 1/2”, 3/4”, or 1” dia x 2” wide wheel, 6” and 3” diameter drive pulleys to yields belt speeds of 5800 or 2800 SFPM. (Pulleys to yield other speeds from 1000 to 8000 SFPM may be substituted for standard sizes or purchased separately. B3 BENCH MODEL complete with 1-1/2 HP  220 volt, variable speed, DC motor with Nema 12 control, HD arm, serrated rubber 8” x 2” wheel with bearing hub and flanges, Adapter arm with Fork tip and 1/2”, 3/4”, or 1” dia x 2” wide wheel, 6” and 3” diameter drive pulleys to yields belt speeds of 5800 or 2800 SFPM. (Pulleys to yield other speeds from 1000 to 8000 SFPM may be substituted for standard sizes or purchased separately. B3 BENCH MODEL complete with 2 HP 220 volt, variable speed, DC motor with Nema 12 control, HD arm, serrated rubber 8” x 2” wheel with bearing hub and flanges, Adapter arm with Fork tip and 1/2”, 3/4”, or 1” dia x 2” wide wheel, 6” and 3” diameter drive pulleys to yields belt speeds of 5800 or 2800 SFPM. (Pulleys to yield other speeds from 1000 to 8000 SFPM may be substituted for standard sizes or purchased separately.
"NEW" VERTICAL/HORIZONTAL VARIABLE SPEED GRINDER
The 90 is for the 90 degree vertical to horizontal tilt feature.