You are here: Home > Rivets
Sort By:
Page of 1
RIVETS BRASS BOLT TYPE BRASS BOLT RIVET STAINLESS BOLT TYPE HIDDEN BOLT BRASS 1/4 PR
These rivets are made up of a threaded stainless steel or brass bolt and two round brass nuts.  Nuts are inletted into the handle, drawn up tight with the bolt, and then ground off flush with the handle material to give a bull's-eye effect. These rivets are made up of a threaded stainless steel or brass bolt and two round brass nuts.  Nuts are inletted into the handle, drawn up tight with the bolt, and then ground off flush with the handle material to give a bull's-eye effect. Hidden bolt rivets are two-piece rivets with solid heads and a threaded bolt in the center section.  The slotted heads are inletted into the handle material, drawn up tight with a screwdriver and then ground flush with the handle.
RIVETS BRASS BLIND BOLT 5/16 PR RIVETS BRASS BLIND BOLT 1/4 PR RIVETS BRASS HIDDEN BOLT 5/16 PR
The blind bolt rivet consists of two solid heads with a blind hole approximately four threads deep on one end and a screwdriver slot on the other.  These are joined by a short piece of all thread rod.  We have these in 1/4" and 5/16" diameter in brass and stainless steel.  Details are provided in the line drawing. The blind bolt rivet consists of two solid heads with a blind hole approximately four threads deep on one end and a screwdriver slot on the other.  These are joined by a short piece of all thread rod.  We have these in 1/4" and 5/16" diameter in brass and stainless steel.  Details are provided in the line drawing. Hidden bolt rivets are two-piece rivets with solid heads and a threaded bolt in the center section.  The slotted heads are inletted into the handle material, drawn up tight with a screwdriver and then ground flush with the handle.
RIVETS STAINLESS HIDDEN BOLT PR 5/16 RIVETS STAINLESS BLIND BOLT 5/16 PR RIVETS STAINLESS BLIND BOLT 1/4 PR
Hidden bolt rivets are two-piece rivets with solid heads and a threaded bolt in the center section.  The slotted heads are inletted into the handle material, drawn up tight with a screwdriver and then ground flush with the handle. The blind bolt rivet consists of two solid heads with a blind hole approximately four threads deep on one end and a screwdriver slot on the other.  These are joined by a short piece of all thread rod.  We have these in 1/4" and 5/16" diameter in brass and stainless steel.  Details are provided in the line drawing. The blind bolt rivet consists of two solid heads with a blind hole approximately four threads deep on one end and a screwdriver slot on the other.  These are joined by a short piece of all thread rod.  We have these in 1/4" and 5/16" diameter in brass and stainless steel.  Details are provided in the line drawing.
RIVETS STAINLESS HIDDEN BOLT .250 10 pair Brass.  CUTLER RIVETS Pilot 5/32" (.162)
Pilot 5/32" (.162)
Our Price: $4.85
Hidden bolt rivets are two-piece rivets with solid heads and a threaded bolt in the center section.  The slotted heads are inletted into the handle material, drawn up tight with a screwdriver and then ground flush with the handle. We stock cutlers rivets in nickel silver and brass.  These compression-type rivets are ideal for Green River and butcher knives.  Shaft diameter is 1/8", head diameter is 5/16", and maximum length is 1".  Shaft diameter expands to approximately 5/32" after compression. Our sets are two males and two females 5/32" (.162) pilot to fit Bolt-Type Rivets and Blind Bolt 1/4". The Counterbore, with interchangeable pilot, is a two part tool for countersinking holes in handle slabs and tang. It affords much flexibility for those who use a variety of rivet types. Select shank size the same diameter as the rivet head and pilot size the same diameter as the center section of the rivet. The pilots are held in place with an Allen screw. For your information the rivet type is listed with appropriate counterbore and pilot size for easy selection.
10 pair Nickel Silver.  CUTLER RIVETS Pilot 7/32" (.218) RIVETS BRASS BOLT TYPE BRASS BOLT 10 PAIR
Pilot 7/32" (.218)
Our Price: $5.95
We stock cutlers rivets in nickel silver and brass.  These compression-type rivets are ideal for Green River and butcher knives.  Shaft diameter is 1/8", head diameter is 5/16", and maximum length is 1".  Shaft diameter expands to approximately 5/32" after compression. Our sets are two males and two females 7/32" (.218) pilot to fit Hidden Bolt Rivet. The Counterbore, with interchangeable pilot, is a two part tool for countersinking holes in handle slabs and tang. It affords much flexibility for those who use a variety of rivet types. Select shank size the same diameter as the rivet head and pilot size the same diameter as the center section of the rivet. The pilots are held in place with an Allen screw. For your information the rivet type is listed with appropriate counterbore and pilot size for easy selection. These rivets are made up of a threaded stainless steel or brass bolt and two round brass nuts.  Nuts are inletted into the handle, drawn up tight with the bolt, and then ground off flush with the handle material to give a bull's-eye effect.
RIVETS BRASS BLIND BOLT 5/16 10 PR RIVETS BRASS BLIND BOLT 1/4 10 PR RIVETS BRASS HIDDEN BOLT 10 PR 5/16
The blind bolt rivet consists of two solid heads with a blind hole approximately four threads deep on one end and a screwdriver slot on the other.  These are joined by a short piece of all thread rod.  We have these in 1/4" and 5/16" diameter in brass and stainless steel.  Details are provided in the line drawing. The blind bolt rivet consists of two solid heads with a blind hole approximately four threads deep on one end and a screwdriver slot on the other.  These are joined by a short piece of all thread rod.  We have these in 1/4" and 5/16" diameter in brass and stainless steel.  Details are provided in the line drawing. Hidden bolt rivets are two-piece rivets with solid heads and a threaded bolt in the center section.  The slotted heads are inletted into the handle material, drawn up tight with a screwdriver and then ground flush with the handle.
RIVET STAINLESS BOLT TYPE 10 PAIR RIVETS STAINLESS HIDDEN BOLT 10 PR 50 pair Brass. CUTLER RIVETS
These rivets are made up of a threaded stainless steel or brass bolt and two round brass nuts.  Nuts are inletted into the handle, drawn up tight with the bolt, and then ground off flush with the handle material to give a bull's-eye effect. Hidden bolt rivets are two-piece rivets with solid heads and a threaded bolt in the center section.  The slotted heads are inletted into the handle material, drawn up tight with a screwdriver and then ground flush with the handle. We stock cutlers rivets in nickel silver and brass.  These compression-type rivets are ideal for Green River and butcher knives.  Shaft diameter is 1/8", head diameter is 5/16", and maximum length is 1".  Shaft diameter expands to approximately 5/32" after compression. Our sets are two males and two females
RIVETS STAINLESS BLIND BOLT 5/16 10 PR RIVETS STAINLESS BLIND BOLT 1/4 10 PR Counterbore 5/16"
Counterbore 5/16"
Our Price: $23.75
The blind bolt rivet consists of two solid heads with a blind hole approximately four threads deep on one end and a screwdriver slot on the other.  These are joined by a short piece of all thread rod.  We have these in 1/4" and 5/16" diameter in brass and stainless steel.  Details are provided in the line drawing. The blind bolt rivet consists of two solid heads with a blind hole approximately four threads deep on one end and a screwdriver slot on the other.  These are joined by a short piece of all thread rod.  We have these in 1/4" and 5/16" diameter in brass and stainless steel.  Details are provided in the line drawing. 5/16" counterbore to fit Bolt-type Rivet, Hidden-Bolt Rivet, and Blind Bolt 5/16" Head. The Counterbore, with interchangeable pilot, is a two part tool for countersinking holes in handle slabs and tang. It affords much flexibility for those who use a variety of rivet types. Select shank size the same diameter as the rivet head and pilot size the same diameter as the center section of the rivet. The pilots are held in place with an Allen screw. For your information the rivet type is listed with appropriate counterbore and pilot size for easy selection.
Counterbore 1/4" RIVETS STAINLESS  HIDDEN BOLT 10 PR 50 pair Nickel Silver CUTLER RIVETS
Counterbore 1/4"
Our Price: $23.75
1/4" counterbore to fit Blind Bolt 1/4" Head. The Counterbore, with interchangeable pilot, is a two part tool for countersinking holes in handle slabs and tang. It affords much flexibility for those who use a variety of rivet types. Select shank size the same diameter as the rivet head and pilot size the same diameter as the center section of the rivet. The pilots are held in place with an Allen screw. For your information the rivet type is listed with appropriate counterbore and pilot size for easy selection. Hidden bolt rivets are two-piece rivets with solid heads and a threaded bolt in the center section.  The slotted heads are inletted into the handle material, drawn up tight with a screwdriver and then ground flush with the handle. We stock cutlers rivets in nickel silver and brass.  These compression-type rivets are ideal for Green River and butcher knives.  Shaft diameter is 1/8", head diameter is 5/16", and maximum length is 1".  Shaft diameter expands to approximately 5/32" after compression. Our sets are two males and two females
Step Drill 5/16" Pilot 7/32" (.218) Step Drill 1/4" Pilot 5/32" (.162) Step Drill 5/16" Pilot 5/32" (.162)
5/16" Step Drill with 7/32" (.218) Pilot to fit Hidden Bolt Rivets 5/16". The step drill is a standard twist drill which has been ground to a smaller diameter on the end. It enables the user too drill a rivet hole through the handle slab with a counterbored hole for the rivet head in a single operation. Select a drill size that is the same diameter as the rivet head and a pilot that is the same diameter as the center section of the rivet. 1/4" Step Drill with 5/32" (.162) Pilot to fit Blind Bolt 1/4" Head. The step drill is a standard twist drill which has been ground to a smaller diameter on the end. It enables the user too drill a rivet hole through the handle slab with a counterbored hole for the rivet head in a single operation. Select a drill size that is the same diameter as the rivet head and a pilot that is the same diameter as the center section of the rivet. 5/16" Step Drill with 5/32" (.162) Pilot to fit Bolt-Type Rivets and Blind Bolt 5/16" Head. The step drill is a standard twist drill which has been ground to a smaller diameter on the end. It enables the user too drill a rivet hole through the handle slab with a counterbored hole for the rivet head in a single operation. Select a drill size that is the same diameter as the rivet head and a pilot that is the same diameter as the center section of the rivet.
Step Drill 1/4" Pilot .175
1/4" Step Drill with .175 Pilot to fit Hidden Bolt Rivets 1/4". The step drill is a standard twist drill which has been ground to a smaller diameter on the end. It enables the user too drill a rivet hole through the handle slab with a counterbored hole for the rivet head in a single operation. Select a drill size that is the same diameter as the rivet head and a pilot that is the same diameter as the center section of the rivet.